Star Water Neutralizer Filter Used
to treat acid water with a pH of 6.0 to 6.8.
neutralizing tank filter contains an acid neutralizing compound
that slowly dissolves as the water passes through it, raising the
pH of the water toward neutral (or 7 on the pH scale). This controls
the etching and blue-green stains on fixtures, glasses, etc.
NSANSSA 10" Acid Neutralizer Filter (includes mineral, gravel
Model NSAPFXLA 12" All-purpose Filter (does not include mineral,
gravel and sand)
and Benefits Include:
With A Bed Of Neutralite/Magnesium Oxide Mineral -
As acid water passes through the filter, some of the mineral
dissolves to raise the pH and neutralize the acid. Since the
neutralizing compound dissolves in the water to correct the
problem, you must periodically add new compound to the tank.
frequency of adding the compound depends on the severity of
problem and the water use.
Controller - Solid
State Control with 24 Volt transformer included, provides precise
control of all functions
1-Inch Diameter Riser Tube for increased flow rate
Multi-Wrap™ Fiberglass Reinforced
Multi-Cycle Valve with easy-clamp ring and patented
Includes Bypass Valve and Installation Kit
year on complete unit
years on electonic control and control valve body
years on mineral tank (excluding mineral)
NSANSSA (10" Acid Neutralizer Filter)
of Mineral: Neutralite/Magnesium Oxide
of Mineral: 1.0 cu. ft. (75% Neutralite, 25% Magnesium
Amount of Gravel Base: 17 lbs.
of Filter Sand: 10 lbs.
Water Pressure Limits: 20 - 125 psi
Water Temperature: 120 oF
Inlet Water Flow: 270 gal./hour
Flow Rate: 12 gal./min.
Flow Rate: 4.5 gal./min.
Pipe Size: 1"
Water pH Limits: 6.0 - 6.8 (May help neutralize water
with a lower pH depending on geographic location)
Micron Rating: 20
Rating: 24V 60Hz
of Backwash Process: Automatic
Limitation Level: 6.0 - 6.8 pH
15,500 gallons (tested with 6.0 - 6.2 pH)